Airdog II-5G Air Fuel Separation Lift Pump System 94-98 Dodge 5.9L 12 Valve Cummins
From the factory, 12 Valve Cummins have a mechanical lift pump that actually works pretty good at maintaining adequate fuel pressure to the P7100 injection pump at stock and slightly above stock power levels. That said, its almost TOO easy to add power to a 12 valve through pump and injector upgrades, which now tasks this stock pump, not allowing for the full power potential of the performance upgrades you're making.
The AirDog II-5G is an all in one premium fuel pump and filtration
system for your 12 Valve Cummins diesel. This system removes water,
particulates, and entrained air from the diesel fuel. The entrained air
that is separated from the fuel is returned to the tank through a small
return fitting. The fuel is delivered to the engine at the correct
pressure and flow rate to meet the demands of the engine under all
operating conditions.
The AirDogII-5G systems feature a built in adjustible diaphragm pressure
regulator. All AirDog II-5G systems include a complete installation kit.
The AirDog II-5G, for this particular application, is preset at 30
psi from factory for a stock application. The regulator is adjustible up
to 70 PSI for the 165 GPH unit and 55 PSI for the 220 GPH version so you can fine tune the system to perfectly match up to your
current and future performance upgrades.
HOW IT WORKS:
The AirDog II-5G draws fuel from the fuel tank through a 1/2” suction line and the DF-220 draws fuel through a 5/8” suction line to reduce the risk of cavitation at the pump. The fuel is then drawn through the water separator where 92% of water is removed per SAE spec 1488. It is then pressurized through a Gerotor pump and sent to the 2 micron fuel filter before it is sent to the injection pump. The air from aerated fuel, due to tank sloshing and engine return lines, is separated and sent back to the tank through the 3/8” return fitting. The excess fuel that the engine does not use is recirculated through the diaphragm regulator back to the suction side of the pump.Select Select Gallon Per Hour (GPH) Output:
From $236.40
Original: $788.00
-70%Airdog II-5G Air Fuel Separation Lift Pump System 94-98 Dodge 5.9L 12 Valve Cummins—
$788.00
$236.40Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
From the factory, 12 Valve Cummins have a mechanical lift pump that actually works pretty good at maintaining adequate fuel pressure to the P7100 injection pump at stock and slightly above stock power levels. That said, its almost TOO easy to add power to a 12 valve through pump and injector upgrades, which now tasks this stock pump, not allowing for the full power potential of the performance upgrades you're making.
The AirDog II-5G is an all in one premium fuel pump and filtration
system for your 12 Valve Cummins diesel. This system removes water,
particulates, and entrained air from the diesel fuel. The entrained air
that is separated from the fuel is returned to the tank through a small
return fitting. The fuel is delivered to the engine at the correct
pressure and flow rate to meet the demands of the engine under all
operating conditions.
The AirDogII-5G systems feature a built in adjustible diaphragm pressure
regulator. All AirDog II-5G systems include a complete installation kit.
The AirDog II-5G, for this particular application, is preset at 30
psi from factory for a stock application. The regulator is adjustible up
to 70 PSI for the 165 GPH unit and 55 PSI for the 220 GPH version so you can fine tune the system to perfectly match up to your
current and future performance upgrades.
HOW IT WORKS:
The AirDog II-5G draws fuel from the fuel tank through a 1/2” suction line and the DF-220 draws fuel through a 5/8” suction line to reduce the risk of cavitation at the pump. The fuel is then drawn through the water separator where 92% of water is removed per SAE spec 1488. It is then pressurized through a Gerotor pump and sent to the 2 micron fuel filter before it is sent to the injection pump. The air from aerated fuel, due to tank sloshing and engine return lines, is separated and sent back to the tank through the 3/8” return fitting. The excess fuel that the engine does not use is recirculated through the diaphragm regulator back to the suction side of the pump.
